Brakes/Levers/Pads

True one-finger braking is at hand. SRAM has overhauled their hood and lever architecture and achieved breakthroughs for fit across all hand sizes and easy access to powerful and smooth, easy braking from anywhere on the bar. Independent reach and contact point adjustment allow for a highly personalized setup, with no risk of pinching your fingers or bottoming out on the bar no matter your settings. Better finger wrap on the hood means less fatigue on long days, and Bonus Buttons let you shift or control ANT+ devices with your thumbs. The caliper is not only stiffer, but lighter too, with phenomenal pad clearance for rub-free operation. All that and they still managed to remove 83g from the pair. - One finger braking from the hoods or the drops for less fatigue - SRAM AXS enabled for easy setup, personalization, and reliability - eTap shift logic for intuitive shifting - Bonus Button provides ANT+ device control or auxiliary shift option - Optimized hood shape and Reach Adjust feature allow the lever to fit a wide range of hand sizes - Carbon brake lever for lightweight - Textured shift paddles and hoods for control and comfort - Bleeding Edge technology for easy and clean bleeds - Contact Point Adjust to personalize brake engagement

All-new lever ergonomics on the DURA-ACE ST-R9270 dual control levers bring new levels comfort and control to road cycling. With our fastest wireless shifting available and even more precise brake modulation, DURA-ACE redefines performance. Now featuring SERVO WAVE ACTION brake technology, the new DURA-ACE ST-R9270 brake lever delivers modulation and control like never before. Wireless shifting keeps your bike looking clean while offering our fastest, most precise gear changes available. All of this resides in a DUAL CONTROL LEVER to employs the most advanced materials to offer light weight and refined ergonomics that provide comfort and control for the most demanding conditions. Clean Cockpit: Wireless connection enhances the aesthetic of your bike while keeping shifting lightning fast 1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries Unparalleled ergonomics engineering refined with pros' feedback - Raised hood peak improves ergonomics, while a longer hood body increases hand support - Compatible with satellite shifters SERVO WAVE technology optimizes brake control - Lighter, smoother lever action - Enhanced modulation thanks to an expanded braking control area Advanced Materials - Carbon fiber brake lever and titanium hardware Compatible with wired connection (for e-bike application) Make DURA-ACE yours with custom button function and adjustable ergonomics - Easily change button function with the E-TUBE app - Find your optimum lever position with simple reach adjust

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

Your time on the bike is precious, let Shimano make it even better. Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven SERVO-WAVE technology. The Di2 platform untethers the shifters while delivering fast and reliable wireless shifting. BR-R8170 disc brake caliper brings a new level of control to the road cycling world with improved modulation and a quicker initial braking point. Despite its smaller construction, the system is quieter than ever and easier to maintain. - The wireless connection provides a clean cockpit, enhancing the aerodynamic effect and easy maintenance - Wider pad clearance decreases brake noise - Maintenance-friendly bleeding process - Unparalleled ergonomic features, such as raised hood peaks on levers - Brake control is optimized with light and smooth lever action - Enhanced modulation thanks to an expanded braking control area - Compatible with wireless or wired connection

The eeBrake G4 is the fourth generation eeBrake featuring 100% CNC machined parts and a wider design optimized for 22-28mm rims. It features a stiffer black arch spring, a revised one-piece center adjuster with built-in resistance for easier use, and ghosted laser etching that will stand the test of time. All with the same stopping power and light weight that you've come to rely on from eeBrakes. - The eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation - The cross cable path aligns the brake cable over the center of the brake which provides a clean and aerodynamic line, moving the cables into the "wind shadow" of the frame - Tool-free caliper centering adjustability provides super-precision and pad motion consistency - One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire, allowing for easy wheel removal - Optimized to work with Shimano, Campagnolo, and SRAM levers

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and represents SRAM's attempt at perfecting braking performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precision braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 is designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

- Ergonomic lever blade - Advanced 9mm internal brake lever piston - 5mm hydraulic brake hose - High performance hydraulic brake fluid - Hybrid pistons - High performance resin pad compound - New high flow caliper - 2.3mm thick rotors - CNC machined and marked adapters - Compatible with 223/220/203/180/160/140mm rotors (sold separately) - Weight: 310g (Front without rotor and adapter)

For a streamlined cockpit and easy access to the dropper post lever, Shimano's RX810-LA dual control lever integrates the brake lever and a dropper post actuator for fast and effortless operation. GRX BR-RX810 hydraulic disc brakes feature a low-profile flat mount design and provide greater control for mixed-terrain riding. - Control a dropper post using the shift lever - Simple set up and maintenance - Excellent heat dissipation

SRAM has optimized the Force AXS hood shape to provide increased finger wrap for more hand sizes, so you can stay secure sprinting for town lines, committing to the rut in a muddy CX race, or chattering down a long gravel descent. The acclaimed hydraulic brake provides excellent power and modulation for confident braking. - AXS enabled for easy setup, personalization, and reliability - eTap shift logic for intuitive shifting - Optimized hood shape fits a wider range of hand sizes - Carbon brake lever for lightweight with textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes - Wireless Blip compatible - Bleeding Edge technology for easy and clean bleeds - Stealth-a-majig connected

SRAM has optimized the Force AXS hood shape to provide increased finger wrap for more hand sizes, so you can stay secure sprinting for town lines, committing to the rut in a muddy CX race, or chattering down a long gravel descent. The acclaimed hydraulic brake provides excellent power and modulation for confident braking. - AXS enabled for easy setup, personalization, and reliability - eTap shift logic for intuitive shifting - Optimized hood shape fits a wider range of hand sizes - Carbon brake lever for lightweight with textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes - Wireless Blip compatible - Bleeding Edge technology for easy and clean bleeds - Stealth-a-majig connected

The Tech 4 V4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. The updated V4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Max rotor thickness with V4 Caliper 3.3mm **Please Note** The V4 caliper is not compatible with all direct mount 180mm forks due to the large piston design and variation in mount positions. We recommend running the V4 caliper with the correct mount and a 200mm rotor in this application. The V4 caliper is also not compatible with the 2021 Commencal Supreme DH frame 200mm Direct Postmount

Magura MT7 HC3 Disc Brake and lever - front or rear hydraulic post mount black/orange - The Magura MT7 Disc Brake and HC3 Lever Set is a high-performance hydraulic brake system. - Carbotecture SL radial master cylinder - Monobloc triple arch quad piston caliper - HC3 1 finger alloy lever blade features adjustable reach & leverage ratio - Flip-flop easy bleed design - Utlizes a performance 4-pad system

In the development of the new Gustav Pro, Magura consistently incorporated feedback from their OEM customers, dealers, end users and top athletes. This extensive collaboration has enabled them to create a product that meets the needs of professional and recreational athletes alike. The increased stability of the Gustav Pro is their answer to the requirements of modern athletes and demanding tracks. At the same time, the faster serviceability ensures that repairs and maintenance, whether after crashes or for regular care, are much easier. Thanks to its robustness and reliability, the Gustav Pro brake is ideal for e-bikes that can be used off-road, but also for everyday use and on tours. Whether for after-work rides, daily commuting or on challenging trails - the Gustav Pro sets new standards in terms of riding experience, maintenance and installation. - Offers more control, later braking points and less arm pump - Designed for use with Gustav Pro 2.5mm disc brake rotor (rotor sold separately) and included 13.S brake pads with 40% more volume allows riders to go more miles with less worries - By enlarging the pistons to 12 mm in the brake master and 19 mm in the caliper, Magura has reduced the overall pressure level, meaning less pressure is lost by expanding the tube - One-piece forged aluminum 4-piston caliper includes Gustav Pro 13.S pads that feature 40% more compound - The new Pro brake lever on the GUSTAV is based on the HC-W brake lever developed together with Loic Bruni with a customized integrated min-reach setting that offers a comfortable length to save hand force and yet a crisp pressure point feel - The new Magura EASY LINK technology allows you a simple plug'n play connection between the hose and brake master allowing riders to install or remove their hose as often and as quickly as desired - Magura has done everything to make bleeding a rare necessity by doubling the oil volume in the expansion tank (7 ml) - Magura's new bleeding valve and a circumferential oil channel without dead ends make bleeding the Gustav Pro incredibly easy - Because we all don't feel like spending time in the workshop, a larger air gap between the pad and the rotor makes many tasks easier for you and puts an end to annoying grinding - Optimized for Shiftmix, regardless of the delivery status, so the required interface is always on board - integrated into the handlebar clamp

A mechanical, cable operated disc brake caliper from Paul Components! Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations. - Meaty stiff calipers give a good response and great feel - Extra-large three ball system running on hardened steel actuators for more smoothness and less wear - Needle bearing thrust washer reduces friction - Sold as caliper only (rotor & adapter must be purchased separately) TECHNICAL INFORMATION: Compatibility: IS/Post Mount Cable pull: Short-Pull for SRAM/Shimano Road Material: 6061 Aluminum, Heat Treated 12L14 Steel Weight: 211g Brake Pads: Kool Stop Sintered

- Super light due to the Carbotecture SL housing - High braking power thanks to the new ergonomic 1-finger HC Carbon lever blade - Suitable for mounting left or right - Reach Adjust: 3mm allen key

SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No

SRAM's right-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group offer precise braking performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM's Rival 22 right shifter is designed to work with a SRAM 11-speed cassette. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again!

SRAM's S-700 Shift Lever w/Hydraulic Disc Brake delivers pro-level shifting performance, excellent ergonomics, and the power and modulation of hydraulic disc braking. Feel the ergonomics and response of SRAM’s DoubleTap shifting as you drop a gear for that grueling climb or ratchet through the 10 speeds in that frantic sprint finish. Once you give the brake lever a squeeze, all that great shifting seems like icing on the cake. You’ll instantly notice that the hydraulic disc brake requires less hand force than a traditional cable-pull brake, and provides incredible power and modulation that makes every road or cross ride better.

The Tech 4 V4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. The updated V4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Max rotor thickness with V4 Caliper 3.3mm - Available in Black, Silver, Bronze, Red, Blue, Orange & Purple **Please Note** The V4 caliper is not compatible with all direct mount 180mm forks due to the large piston design and variation in mount positions. We recommend running the V4 caliper with the correct mount and a 200mm rotor in this application. The V4 caliper is also not compatible with the 2021 Commencal Supreme DH frame 200mm Direct Postmount

- XTR M9120 brake lever and M9120 4-piston hydraulic disc brake caliper - Increased stopping power & improved modulation for greater dowhnill confidence and control - Additional contact point on handlebar increases stiffness by 8% vs BL-M9020 - Quicker engagement & shorter, adjustable free stroke - ServoWave technology - Toolless adjustable reach - Pre-assembled with SM-BH90-SBM high power hose - Includes N04C metal pads w/ fins - Weight: 385g per side (lever, caliper, hose & RT-MT900 rotor)

The Tech 4 E4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. The updated E4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. Increased power versus Tech 3. Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. Hinged clamp reducing weight and ergonomics. Shifter integration improved for more adjustability. Tool free bite point and reach adjustments. Rigid CNC machining. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Maxium Rotor thickness for E4 caliper 2.3mm

- 4 front pistons for maximum braking power, 2 rear pistons for perfect modulation - Short HC lever mean that it can reliably deliver full braking power at the touch of just one finger. - Position: Front and Rear - Hydraulic Hose Length: 2200mm - Fluid: Mineral oil - Lever Blade Material: Aluminum

The TRP EVO PRO was designed for serious downhill, enduro, trail, and E-MTB riders who demand race-ready performance under the most extreme conditions. With big shoes to fill following the success of the beloved DH-R EVO, the EVO PRO’s development was not taken lightly. TRP worked closely with top athletes from various teams on the World Cup DH circuit, gathering feedback and testing data to refine every detail. The result is a brake that empowers riders to push their limits even further, now with enhanced customization through a shorter reach and pad activation dial—delivering the next EVOlution in TRP performance. - Pad Activation Dial (PAD) enables precise adjustment of lever modulation and bite point, giving riders full control over pad engagement during the lever stroke for a tailored braking feel - Increased clearance, designed specifically for use with TRP industry leading 2.3mm thick rotors (Sold Separately) - Lever reach adjuster for personalized ergonomics, allows user to fine-tune the lever blade position to match their hand size and riding preference - Ergonomic, sportive lever blade for increased comfort and control - Clean cockpit design streamlines cable path for internal or external routing - Race-proven technology delivering exceptional braking power and consistency - High-flow 4-piston caliper for strong, reliable braking performance - Easy setup and maintenance for a seamless service experience - Convenient top loading pad design

Cyclocross, adventure, or road—whatever your pursuit, the Force 1 HRD brake lever features our HydroR design, with superb ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. Features - Lever body design offers improved finger wrap and improved comfort and control - Internals feature easy access to bleed ports - Master cylinder design featuring optimized pistons and seals for power and control - Flat mount caliper - Left-side lever

SRAM's Force 1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between rider and bike and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side rear hydraulic-brake carbon lever has the same shape and feel as the Force 1 right lever, but has no shift paddle. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The brakes themselves provide incredible modulation and stopping power. You'll never go back to rim brakes again! - The moto-style set up allows you to hook up your left brake lever to your rear wheel. - Carbon fiber lever blade - Bleed port is easily accessed

SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

The Tech 4 E4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. The updated E4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. Increased power versus Tech 3. Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. Hinged clamp reducing weight and ergonomics. Shifter integration improved for more adjustability. Tool free bite point and reach adjustments. Rigid CNC machining. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Maxium Rotor thickness for E4 caliper 2.3mm

Increased power versus Tech 3. Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. Hinged clamp reducing weight and ergonomics. Shifter integration improved for more adjustability. Tool free bite point and reach adjustments. Rigid CNC machining.

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake