Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

$291.99
Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail. - Engineered in Germany with better seal design for improved durability - Compatible with e-mountain bikes - Spoke Count: 32H - Boost only - 6-bolt brake interface
$291.99
- Six pawls are offset to work in two groups of three, with 66 points of engagement e-bike certified - Center locking rotor interface (lock ring included) - Lifetime Warranty - Position: Front - Axle Type: 12mm TA - Hub Spacing: 100mm - Hub Drilling: 20H - Rotor Mount: Center Lock - Hub Spoke Type: J-bend - Weight: 97g
$546.99
- Six pawls are offset to work in two groups of three, with 66 points of engagement - e-bike certified - Center locking rotor interface (lock ring included) - Lifetime Warranty
$546.99
In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM's development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp's Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. There are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace. - Better sealing, increasing durability over previous hub model - Quick engagement for a responsive ride - Lightweight - Same bearing size as premium-level Cognition hub - e-bike certified - Disc brake hub with Center Lock rotor interface. The lock ring is included
$33.54
The 3.30/3.30Ti 9mm Thru Axle Hub Kit makes Stan's 3.30 front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
$33.54
The 3.30HD 9mm Thru Hub Kit makes Stan's 3.30HD front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
$31.99
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.
$169.99
- Highly weight-optimized front hub, ideal for Gravel and XC. - 28mm-diameter bearings minimize overall weight and allow adaptability up to 15mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Compatible with 28 HEX front hub adapters only - Advanced seal system improves prevention of bearing contamination
$174.99
- Weight-optimized, gravity-inspired front hub - 32mm-diameter oversized bearings allow adaptability up to 20mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Compatible with 32 HEX front hub adapters only - Advanced seal system improves prevention of bearing contamination
$339.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
$339.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
$339.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
$189.99
- Micro Spline freehub for Oozy/Spike rear hubs - Material: steel
$274.99
- Ultra-tough 5 bearing Single Speed rear hub for All Mountain, DJ, FR, Pumptrack, and BMX. - Integrated 3mm 11T Cog Freehub (for 1/8" SS Chains) - Female Axle, M10 Lock-down Bolts, Alloy End-Caps - Wide Flange design eliminates dish in rear wheel, maximizing wheel strength & stiffness - Hole count: 32H - 6-bolt
$48.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
$609.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible
$324.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend
$90.99
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
$79.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
$239.99
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
$264.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading. - Weight: 313 grams
$131.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
$327.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Includes Quick Release & 12x142mm Through AxleCaps - Fully convertible with tool free end caps - DOUBLE TIME mechanism offers smooth,quick and durable engagement - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Axle type: Conversion Caps included - Spoke holes: 24 - Brake compatibility: Disc (6-bolt) - Driver Mechanism: Double Time - Four Pawl - Axle material: Tapered aluminum - Driver body material: Aluminum - Hub shell: Aluminum - Seeker angled flanges - Oversized body
$327.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes
$385.50
When we first introduced our Wacky One-Speed Rear Device (W.O.R.D.), it was the first purpose-built single speed mountain bike hub. That original hub not only set design standards that continue to this day, like a 52mm single speed chainline, it also proved that small American manufacturers could stand out in a market increasingly crowded by bigger overseas brands. When designing this modern version of the WORD, we spread the flanges out as far as possible while leaving room for freewheel threading. This allows the WORD to be built up as a strong dishless wheel. Over the years we’ve also improved upon the original axle and bearing adjustment mechanism to produce a single speed hub that we’re proud to call one of our heritage - 6061 Aluminum - 200g - Anodized or Polished - Black or Silver - Axle Spacing: 135mm - Flange Diameter: 43m - Center to Flange: 39.5mm - Chainline: 52mm - Spoke Holes 28, 32, or 36 - Freewheel threading English 1.37x24tpi - Axle Bolt Torque 21 N·m
$385.39
These hubs are machined from three inch round bars of 6061 aluminum. - High flanges builds a stiff, strong wheel - The axle is ground from 7075 aluminum, which has a great strength to weight ratio - Adjustable precision bearings - Knurled stainless steel outer locknut faces - 216g (inc bolts) Dimensions: Axle Spacing: 100mm Flange Diameter: 65mm Center to Flange: 32.5mm
$640.00 - $655.00
- Made start to finish in Asheville, NC - Light weight and easy to service
$335.00
- Made start to finish in Asheville, NC - Light weight and easy to service
$640.00 - $655.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable
$640.00 - $655.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable
Page 1 of 3 Next page